NBS Technologies Javelin DNA User Manual page 33

-Print Self-Test Card
① If Connected to a PC
1. Turn on the printer connected to a PC.
2. Load the ribbon and press the "RIBBON SET" button.
3. Insert a single card into the slot or load it on the Input Hopper.
4. Right-click "NBS Technologies Javelin Driver→ Printing preferences→ Control
tab→ Direct Printer Control → Self Printing"
5. "Self Printing" is indicated on the LCD display as a test card is printed so
that you can check the printing quality.
64
② If Not Connected to a PC: User Mode
1. Turn on the printer (there is no need to connect it to a PC).
2. Insert a single card into the slot or load it on the Input Hopper and load
the ribbon.
3. Hold down both the "EJECT" and "RIBBON SET" buttons until "USER
MODE" is indicated on the LCD display.
STAND-BY MODE
4. Hold down the "RIBBON SET" button in the USER MODE, and go
into the "1. DIAGNOSIS" menu.
DIAGNOSIS
5. Hold down the "RIBBON SET" button in the "DIAGNOSIS → 1. SELF
PRINT" menu to start printing a test card.
SELF PRINTING MODE
USER MODE
SELF PRINTING
65
JAVELIN DNA User Guide Manual