4) Network Setting - Manual
Retrieve the IP Address, Subnet Mask and Gateway to be used by the
printer from the network administrator.
1.Go to "Start → All Programs → NBS TECHNOLOGIES → Network" and
click "OK" to open the settings window.
2. Select the MAC address from the Board List.
3. Enter IP Address, Subnet Mask and Gateway.
44
4. Set the Local Port to 9200 (cannot be changed).
5. Do not check the DHCP Mode. Make sure to leave the box unchecked.
6. Click "Setting". This takes about 30 seconds. When the settings
complete, the printer reboots automatically.
45
JAVELIN DNA User Guide Manual