5. Hold down the "RIBBON SET" button in the "USER MODE" to go
into "1. DIAGNOSIS".
USER MODE
6. When the LCD display indicates "1. DIAGNOSIS", press the "RIBBON
SET" button to go into "2. CLEAN MODE".
DIAGNOSIS
7. Hold down the "RIBBON SET" button until cleaning starts. The cleaning
card will be ejected after it moves back and forth 10 times.
CLEANING
70
8. When the LCD display indicates "CLEAN COMPLETE", remove the
cleaning card. Then, press both the "EJECT" and "RIBBON SET" buttons
to go back to the "DIAGNOSIS" menu.
USER MODE
Do not use the printer for 2-3 minutes
Caution
until the alcohol solution is fully dried.
9. Hold down the "EJECT" button to go into Stand-by Mode.
STAND-BY MODE
DIAGNOSIS
71
JAVELIN DNA User Guide Manual