NBS Technologies Javelin DNA User Manual page 19

2. The initial screen of the Javelin Printer Driver is displayed as shown in the
picture. Click "Start" to install the program.
3. Select the Printer driver & Network driver options to install the and click "Next" to
proceed.(Connect a LAN cable Javelin DNA series and select "Network Software")
4. Read the Terms of Software and check " Agree". Then, click "Next" to proceed.
5. Click "Finish" to complete the installation process. Finish.
36
5. Install Network Printer
5-1. Auto Installation
Select "Network Printer" and the the printer IP address will be displayed if it
is connected to the network. Click "Next" to continue.
5-2. Manual Installation
If the printer's IP address is not shown as in the picture, then check the
following.
(Make sure that the printer is in the same IP range.)
(1) If they are in the same IP range
For example, if your PC's IP address is 192.168.0.xxx, then the printer's IP
address must be 192.168.0.yyy.
If they are not in the same IP range, check "Input by user" and enter the
printer's IP address. Then, click "Next" to proceed.
37
JAVELIN DNA User Guide Manual