NBS Technologies Javelin DNA User Manual page 32

⑦ About
This tab displays the version information.
Check IP Address & Print Test Card
-Check IP Address
1. Hold down both the "EJECT" and "RIBBON SET" buttons until "USER MODE"
is indicated on the LCD display.
STAND-BY MODE
62
USER MODE
2. When "USER MODE" is indicated in the LCD display, press the
"RIBBON SET" button to go into "3. SET MODE". Then, hold down
the "RIBBON SET" button.
SET MODE
3. When "SET MODE" is indicated in the LCD display, press the "RIBBON
SET" button several times to go to "4. NETWORK CONFIG". Then, hold
down the "RIBBON SET" button until the IP address displays on the screen.
NETWORK CONFIG
5. To go into STAND-BY mode, hold down both the "EJECT" button and
"RIBBON SET" button together to go to the previous menu ("4. NETWORK
CONFIG"). Then, hold down the "EJECT" button to enter STAND-BY mode.
IP/SUB/GATEWAY
STAND-BY MODE
Check
Go up the menu: Press the "EJECT" button.
Go down the menu: Press the "RIBBON SET"
button.
IP/SUB/GATEWAY
NETWORK CONFIG
63
JAVELIN DNA User Guide Manual