18
4.4 Filter unit
The filter unit is installed on the top of the machine frame.
• Raise the filter unit over the top of the machine frame and lower the unit. Ensure that the gasket on the underside
of the filter unit has not been damaged.
• Align the filter unit with the aid of a screwdriver and install a screw in each corner.
• When the filter unit has been aligned, lower it and secure it by tightening all 12 screws.
• Remove the spring loaded filter holder.
Note!
This has to be angled outwards in the correct direction in order to be removed from the filter housing.
• Install the filter cassettes (2 cassettes 292 x 610 x 610).
Installation manual
fig.6764
fig.6774
fig.6778