Siting - Electrolux T4900CR Installation Manual

16
Note!
The two front lower feet of the machine may have to be cut so as to avoid striking against the machine's
baseplate.

4.2 Siting

Place the machine on its final position.
The figure shows minimum distance to a wall and / or other machines.
A Min. 1000 mm
B Min. 600 mm
Note!
The machine should be positioned so that there will be enough space for working, both for the user and
service personnel.
Respecting the given recommendations will provide easy access for maintenance and service operations.
In case of space limitations, it is possible to install machines without respecting to the given recommendations. If so,
keep in mind that it might be necessary to disconnect and move other machines to be able to reach and perform
service on affected machine.
Installation manual
A
B B
fig.6770
fig.6794A