Kramer MTX3-16-M User Manual page 74

Function Description
EQ-LVL Set equalization
level.
EQ-LVL?
Get equalization
level.
ETH-PORT
Set Ethernet port
protocol.
If the port number
you enter is already
in use, an error is
returned.
The port number
must be within the
following range: 0-
(2^16-1).
ETH-PORT? Get Ethernet port
protocol.
EXT-DEF-
Set the default input
VIDIN
for an output.
This command
defines the default
routing for the first
time an output
module card is
installed into a slot.
This setting is not
deleted after factory
reset.
EXT-DEF-
Set the default input
VIDIN?
for an output.
EXT-FAN- Set the fan level.
LEVEL
Sets the auto
sync features for the
selected scaler.
EXT-FAN-
Get the fan level.
LEVEL?
Sets the auto
sync features for the
selected scaler.
EXT-INFO-
Get a list of ports
IO?
according to signal
type (video or audio)
and direction (inputs
or outputs).
MTX3-16-M – Protocol 3000
Syntax
COMMAND
#EQ-LVLio_mode,io_index,eq_type,eq_level<CR>
FEEDBACK
~nn@EQ-LVLio_mode,io_index,eq_type,eq_level<CR><L
F>
COMMAND
#EQ-LVL?io_mode,io_index,eq_type<CR>
FEEDBACK
~nn@EQ-LVLio_mode,io_index,eq_type,eq_level<CR><L
F>
COMMAND
#ETH-PORTport_type,port_id<CR>
FEEDBACK
~nn@ETH-PORTport_type,port_id<CR><LF>
COMMAND
#ETH-PORT?port_type<CR>
FEEDBACK
~nn@ETH-PORTport_type,port_id<CR><LF>
COMMAND
#EXT-DEF-VIDINout_index,in_index<CR>
FEEDBACK
~nn@EXT-DEF-VIDINout_index,in_index<CR><LF>
COMMAND
#EXT-DEF-VIDIN?out_index<CR>
FEEDBACK
~nn@EXT-DEF-VIDIN?out_index,in_index<CR><LF>
COMMAND
#EXT-FAN-LEVELfan_index,fan_speed,fan_mode<CR>
FEEDBACK
~nn@EXT-FAN-
LEVELfan_index,fan_speed,fan_mode,fan_status<CR><
LF>
COMMAND
#EXT-FAN-LEVEL?fan_index,fan_speed
FEEDBACK
~nn@EXT-FAN-
LEVELfan_index,fan_speed,fan_mode,fan_status<CR><
LF>
COMMAND
#EXT-INFO-IO?signal_type,io_mode<CR>
FEEDBACK
~nn@Devicesignal_type,io_mode,io_index,io_index,i
o_index,...<CR><LF>
Parameters/Attributes
– Input/Output
io_mode
0 – Input
1 – Output
io_index – Number that indicates the
specific input or output port:
1-16
eq_type – Equalizer Types
0 – Bass
1 – Treble
– Equalizer level (range 0 –
eq_level
15).
– Input/Output
io_mode
0 – Input
1 – Output
– Number that indicates the
io_index
specific input or output port:
1-16
– Equalizer Types
eq_type
0 – Bass
1 – Treble
– Equalizer level (range 0 –
eq_level
15).
port_type – TCP/UDP
– TCP/UDP port number
port_id
(0 – 65535)
– TCP/UDP
port_type
0 – TCP
1 – UDP
port_id – TCP / UDP port number (0
– 65535)
out_index – Number that indicates
the specific output:
1-16
* – All outputs
– Number that indicates the
in_index
specific input:
1-16
– Number that indicates
out_index
the specific output:
1-16
* – All outputs
– Number that indicates the
in_index
specific input:
1-16
fan_index –
being set: 1 – 3.
fan_speed: 1 – 7.
–
fan_mode
0 – Fan operation automatically
controlled based on the device
temperature
1 – Continuous operation
The default is automatic. If a fan is
set to continuous and the device is
reset, the fan returns to automatic.
– OK or
fan_status
fan_index –
being set: 1 – 3.
<CR>
fan_speed: 1 – 7.
–
fan_mode
0 – Fan operation automatically
controlled based on the device
temperature
1 – Continuous operation
The default is automatic. If a fan is
set to continuous and the device is
reset, the fan returns to automatic.
– OK or
fan_status
signal_type–
1 – video
2 – audio
– Input/Output
io_mode
0 – Input
1 – Output
– Number that indicates the
io_index
specific input or output port:
1-16
Kramer Electronics Ltd.
Example
Set Bass EQ level of the
speaker output to 12:
#EQ-LVL1,1,0,12<CR>
Get Bass EQ level of the
speaker output 2 to 12:
#EQ-LVL?1,2,0<CR>
Set the Ethernet port
protocol for TCP to port
12457:
#ETH-PORT0,12457<CR>
Get the Ethernet port
protocol for UDP:
#ETH-PORT?1<CR>
Set input 1 as the default for
output 3::
#EXT-DEF-
VIDIN3,1<CR>
Get the default input for
output 3::
#EXT-DEF-VIDIN?3<CR>
Number of the fan Set fan #1 speed to 2 and
mode to continuous:
#EXT-FAN-
LEVEL1,2,1<CR>
WARN.
Number of the fan Get fan #1 status:
#EXT-FAN-LEVEL?1<CR>
WARN.
Get the list of video input
ports:
#EXT-INFO-IO?1,0<CR>
74