Opening The Embedded Web Ui - Kramer MTX3-16-M User Manual

Opening the Embedded Web UI

If an embedded web page does not update correctly, clear your Web browser's cache.
To browse the MTX-16-M embedded web UI:
1. Type the IP address of
▪
You can view the IP address by pressing MENU
view the ETH0 IP address (port NET-1
▪
If no DHCP server is used, then the default IP address is 192.168.1.39. If that is in
use, you can use any IP address in the range 192.168.1.1 to 192.168.1.255.
Because the device uses a private CA (authorization certificate), the browser displays a
warning: "Your connection isn't private" (in Microsoft Edge – other browsers may display a
different message).
2. Click Advanced to continue, the Login window appears:
• The first login must be with the administrator default username and password
(see
Default Communication Parameters
• For password requirements, (see
•
To define new users after logging in, see
After the first login, you need to change the admin password and re-login.
MTX3-16-M – Managing MTX3-16-M from the Embedded Web UI
MTX-16-M in the address bar of your internet browser.
Figure 23: Microsoft Edge message
Figure 24: Embedded Web UI Login Window
on page
Securing MTX3-16-M Operation
, five times and pressing 1 to
11
on the chassis).
23
).
56
Creating or Deleting User
Kramer Electronics Ltd.
on page ).
15
on page .
Accounts 38
27