Kramer MTX3-16-M User Manual page 24

Viewing Network Settings
Use the MTX3-16-M
settings.
To view network settings:
1. Press MENU
on the LCD display.
2. View the IP Address:
▪
Press 1 on the numeric keypad to view ETH0 IP (port NET-1
address.
▪
Press 2 on the numeric keypad to view ETH1 IP (port NET2-1G
address.
Network settings are viewed.
Restarting and Resetting the Matrix Via LCD Menu
Use the MTX3-16-M
parameters.
Factory Reset via the front panel does not reset administrator/user accounts and
passwords or the MAC address and device serial number. Use the embedded web UI or
Protocol 3000 commands to restore default factory-set passwords.
To reset or restart the device:
1. Press MENU
the LCD display.
2. do any of the following:
▪
Press 1 on the numeric keypad to restart the device.
▪
Press 2 on the numeric keypad to reset the device to Its factory default settings.
The TAKE button flashes twice.
3. Press TAKE twice as instructed on the LCD display.
Device has restarted/reset.
MTX3-16-M – Managing MTX3-16-M via Front Panel Buttons
front panel LCD display to view the device IP Address and other network
, on the numeric keypad 5 times. The Ethernet Display screen appears
11
front panel LCD display to reboot the device or reset it to its default
, on the numeric keypad 6 times. The Matrix Reset screen appears on
11
Figure 21: Matrix Reset LCD Display
Kramer Electronics Ltd.
on the chassis)
23
on the chassis)
24
24