Table of Contents
Advertisement
4.5 Tip installation and removal
4.5.1 Tip installation
1) Screw the tip to the handpiece.
2) Align the gap of the wrench with
the tip.
3) Rotate the wrench clockwise until
it turns 90 degrees.
Tip
Handpiece
Wrench
Rotate the wrench until
it turns 90 degrees
4
Installation
4.5.2 Tip removal
1) Align the gap of the wrench with
the tip.
2) Rotate the wrench
counterclockwise until the tip
becomes loose.
3) Unscrew the tip from the
handpiece
Rotate the wrench until
the tip becomes loose
Tip
Wrench
Handpiece
Page 13 / 36
Advertisement
Table of Contents
Need help?
Do you have a question about the UltraMint Pro and is the answer not in the manual?
Questions and answers