Table of Contents
Advertisement
OPERATION CONTROLS & FUNCTIONS
Front Panel
q POWER BUTTON:
second to enter the standby mode.
w POWER LED:
when on standby.
e INPUT 1-4 LEDS:
to an active source device, the corresponding green LED will be on.
Note: Only the LED of the selected input channel will light in green on single screen
display mode; all LEDs will light in green on multiview mode.
r AUTO LED:
When the device is in AUTO mode, the AUTO LED will light green, and a
HDMI is automatically identified. When the current displayed source signal is disconnected,
the switcher will automatically identify the next connected HDMI input port.
t IR WINDOW:
y AUTO BUTTON:
mode.
u INPUT BUTTON:
i MULTIVIEW BUTTON:
• Press this button to circularly select: SINGLE - PIP - PBP (1) - PBP (2) - Triple (1) -
Triple (2) - Quad (1) - Quad (2).
• Hold down this button for 3 seconds to select the aspect ratio for PBP (1) / PBP (2) /
Triple (1) / Triple (2) / Quad (1) / Quad (2).
o RES BUTTON:
• Press the RES button to circularly switch the output resolution of the HDMI OUTPUT port
(Please refer to the output resolution list of "8. Video & Audio").
• Hold down the RES button for 3 seconds to switch the output resolution to 720P60.
Press this button to power on the device. Hold down this button for 1
The Power LED will light green when the product is powered on, and red
Input signal indicator lights. When the HD 1/2/3/4 ports are connected
IR signal receiving window.
Automatic button, only available on a single screen AUTO display
Input source button, only available on single screen display mode.
Multiview display mode button.
Output resolution switching button.
5
Advertisement
Table of Contents
