Multiview - A-Neuvideo ANI-PiP-41UHD Instruction Manual

Multiview

The switcher supports (8) categories of multiview display modes: SINGLE, PIP, PBP (1),
PBP (2), Triple (1), Triple (2), Quad (1), Quad (2)
Users can select different operations for different Multiview modes as following:
SINGLE: Inputs selection
PIP: Inputs selection, Sub window size and position selection PBP (1), PBP (2), Triple (1),
Triple (2), Quad (1), Quad (2): Inputs selection, Display mode selection, Display aspect
selection Multiview window distributions are as following:
*
Users can select Multiview modes via RS-232 commands or OSD menu navigation.
* The ANI-PIP-41UHD switcher supports customized PIP size and location via RS-232
commands.
The command format is "s PIP Hstart Vstart Hsize Vsize!"
Hstart=(1~100)
Vstart=(1~100)
Hsize=(1~100)
Vsize=(1~100)
For example: the command "s PIP 10 10 20 20!" will produce an image as shown below:
9