Arm Your System With Nxg-183X-Eur Keypad - CADDX xGenConnect Installation And Programming Manual

A valid PIN code will need to be entered to determine what permissions they
have, this includes which Partitions and at what time/day that user has access.
Arm Your System in Stay Mode
Enter a valid PIN code with Stay permissions to unlock the screen.
Touch the Stay or Stay + button to arm your system in Stay mode:
The icon will change to yellow when alarm system is set in Stay mode.
If your system has multi-Partition control enabled, the Stay + button will be
displayed.
A valid PIN code will need to be entered to determine what permissions they
have, this includes which Partitions and at what time/day that user has access.
Arm Your System in Instant Stay Mode
Enter a valid PIN code with Stay permissions to unlock the screen.
To arm in Instant Stay mode, touch the Stay button two times until the icon is red
and displays "Instant":
This indicates the alarm system is set in Instant Stay Mode.
Arm Your System in Night Mode
Enter a valid PIN code with Stay permissions to unlock the screen.
To arm in Night Mode touch the Stay or Stay + button a total of three times until
the icon is red and displays "Night Mode":
Touching the Night Mode button again will cycle the system back to Stay Mode.

Arm Your System with NXG-183x-EUR keypad

Arm Your System in Away Mode
Enter a valid PIN code to unlock the screen. Press the Arm Away button to arm
your system in Away mode.
Enter your PIN and press Enter.
34 xGenConnect Installation and Programming Guide