CADDX xGenConnect Installation And Programming Manual page 112

Programming Sequence
6. Communicator
a) Options
b) IP Config
c) Ethernet
d) Radio
e) Dial IP
f) Email
g) Remote Access
h) System Event
Reporting
18. Channel Groups
4. Partitions
a) Partition Options
b) Partition Timers
c) Partition Reporting
7. Schedule
18. Channel Groups
Instructions
1. Go to Partitions.
2. Select a Partition Number.
3. Enter a descriptive name.
4. Select the Options you want to enable for this Partition. Partition 2 and above
have "Use Partition 1 Options" ticked to allow faster programming of your
system. Untick this box if you want to customize options for Partition 2 and
above.
100
5. Channels
→
6. Communicator
17. Event Lists
12. Partition Groups
→
18. Channel Groups
→
xGenConnect Installation and Programming Guide
→