Table of Contents
Advertisement
Reader
Reporting
RTE (Request-to-Exit
zone)
Scene
Schedule
Screensaver
Service provider
Shunt
Stay mode
Tamper
UltraSync
UltraSync+ app
xGenConnect Installation and Programming Guide
A device used for door control that can read cards to allow access.
May be integrated into a keypad.
See Alarm reporting.
A zone that is programmed to open a door using a button or motion
detector. Used to allow users to exit without using the door reader.
Request to exit is often abbreviated to RTE. Also called egress.
Each scene can trigger up to 16 actions to create an automation
event. This can save users time by automatically running multiple
actions. A scene can be triggered manually, through a schedule, or
via a system event.
A schedule is a list of up to 16 sets of days and times. Typically these
are used to provide access to users only within the specified sets of
days and times. Outside of the schedule a user will not have access
to the system. Schedules are used to automatically arm and disarm
specified partitions using the Arm-Disarm feature. Scenes can
perform a set of actions according to a specified schedule. Schedules
themselves can be enabled and disabled through actions. This
powerful feature allows you to provide conditional access to various
users and devices based on system conditions.
The screensaver activates on a keypad after a predefined idle time.
In this mode, the information displayed on the keypad is very limited
for security reasons. A user intervention is necessary to return to
a normal display mode.
The installation / maintenance company servicing your security
system.
A procedure that automatically bypasses a zone from generating an
alarm when it is activated. For example, shunts stop a door
generating an alarm when opened for a short time.
To turn your security system on when you are staying in the
premises, this will automatically bypass pre-programmed zones and
arm others. Often used to arm only the perimeter while allowing
movement inside the premises.
A situation where a zone, a keypad, control panel, expander or
associated wiring are tampered with, or accidentally damaged. The
security system tamper facility activates a signal when tamper
occurs. Tamper alarms from zones are called zone tampers.
A secure cloud service with full redundancy to route encrypted alarm
messages from your security system to a Central Monitoring Station.
It also provides secure connections between the UltraSync+ app,
control panel and cameras. No programming, email addresses, user
names, or PINs are stored for security and data privacy reasons.
Mobile app for smartphones to control the security system. View
status, control zones and outputs, view cameras, program users and
other alarm features.
149
Advertisement
Table of Contents
