CADDX xGenConnect Installation And Programming Manual page 101

Then assign that schedule to the User:
Programming Instructions for Users
Goal
Add/Edit/Remove users from your xGenConnect system.
Pre-conditions
•
Have programmed or customized Permissions. Alternatively you can use the
defaults.
•
Have programmed or customized Schedules. Alternatively you can use the
defaults.
Notes
•
PIN codes must be unique across the system, no two users can share the
same PIN code.
•
PIN codes must be 4 to 8 digits in length.
•
EN 50131 Grade 3 required settings are 6 digits minimum.
•
User name must be assigned to give that user access to UltraSync+ app or
xGenConnect Web Server. A user with no first name will be unable to gain
remote access.
•
The default installer account is User 256 with user name installer and PIN
9713, with Master Engineer user type. These details are used to Log in to the
Web Server web pages and UltraSync+ app.
xGenConnect Installation and Programming Guide 89