CADDX xGenConnect Installation And Programming Manual page 141

Programming Sequence
8. Actions
10. Devices
Outputs
zone expanders,
keypads, transmitters
11. Permissions
7. Schedules
Instructions
1. Open Action Groups.
2. Select an Action Group Number.
3. Enter a descriptive Name.
4. Select the Actions you want to include.
Next
•
Assign Action Group to a Permission.
•
Assign Permission to a User or Device.
xGenConnect Installation and Programming Guide
→ 19. Action Groups
→ 1. User
a) Main
b) Advanced
11. Permissions
7. Schedules
→ 11.Permissions
a) Groups
b) Options/Timers
13. Menus
12. Partition Groups
18. Channel Groups
x. Action Groups
→
129