Sump Module - Haier GE GDF510P M4 Series Service Manual

4. Remove the 1/4-inch screw holding the strike
(a Phillips-head screw will come with the
service part for easier installation).
Door Strike
Attachment Strip
Mounting Screw
Strike
5. Hybrid or stainless steel (SS) inner door
models have a feature molded in the top
attachment strip which secures the strike to
the door.
Door Strike
Attachment Strip
Mounting Screw
Hinge Receivers and Cross Brace (some
models)
Stainless steel inner door models have a cross
brace connecting the hinge receivers. This brace
acts as a door stiffener.
Friction Pads
Hinge Receivers
1/4-inch hex-
head screw
Cross Brace
– 39 –

Sump Module

Appearances may vary throughout this service
guide. Some models do not have all features
shown or may be different depending the model
number.
The Ultra-Fine Filter is a twist lock design and
consumer cleanable. To remove, turn counter-
clockwise (CCW).
The fine filter is secured by the ultra-fine filter and
two tabs. To remove, remove the ultra-fine filter
and lift up on the front, allowing the back to slide
out of the tabs.
(Continued next page)