Counting With Freely Selectable Reference Quantiy < Free - KERN CKE 6K0.02 Operating Instructions Manual

Use the
(standard setting see chap. 8.4).
9.2.2 Counting with freely selectable reference quantiy < FrEE>.
Put the empty container on the weighing plate and press the TARE
button.
The container is tared, the zero display will appear.
Fill the container with any number of reference pieces
Press and hold the
corresponding active digit is flashing.
Enter the number of reference pieces, for the numerical input see chap.
3.2.2
The balance will calculate the average item weight and then displays
the quantity of pieces.
Remove reference weight. The balance is now in piece counting mode
counting all units on the weighing plate.
Fill the counting quantity. The piece quantity is shown directly in the
display.
Use the
(standard setting see chap. 8.4).
29
key to switch between piece quantity and weight display
key, the numerical input window appears. The
key to switch between piece quantity and weight display
TCKE-A/-B-BA-e-2333