Automatic Data Output < Auto; Continuous Data Output < Cont - KERN CDS 4K0.02 Operating Instructions Manual

11.2.3 Automatic data output < auto >
Data output happens automatically without having to press the PRINT-key as soon
as the corresponding output condition has been met, dependent on the setting in the
menu.
Enable function and set the output condition:

In Setup menu invoke the menu setting < Print  PrMode  trig >
and confirm with ➔ button.

For an automatic data output select the menu setting < auto > using the
navigation keys  and confirm by the ➔ button.

Use the navigation keys  to select the setting < on > and confirm on ➔
button. < zRange> is displayed.

Acknowledge by ➔-button and set the required output condition with the
navigation keys .

Acknowledge by ➔-button.

To exit the menu press the navigation key  repeatedly.
Place goods to be weighed on balance:

If required, place empty container on scale and tare.

Place weighed goods and wait until the stability display (
The weighing value is issued automatically.

11.2.4 Continuous data output < cont >
Enable function and set the output interval:

In Setup menu invoke the menu setting < Print  PrMode  trig >
and confirm with ➔ button.

For a continuous data output select the menu setting < cont > using the
navigation keys  and confirm on ➔ button.

Use the navigation keys  to select the setting < on > and confirm on ➔
button.

< speed > is displayed.

Acknowledge with the ➔-button and set the required time interval with the
navigation keys  (numeric input see chap. 3.2.2)

<Zero> & <Stable> set the required output condition.

To exit the menu press the navigation key  repeatedly.
Place goods to be weighed on balance

If required, place empty container on scale and tare.

Place goods to be weighed.

The weighing values are issued according to the defined interval.
TCDS-BA-e-2210
) appears.
48