Issue Functions; Add-Up Mode < Sum - KERN CDS 4K0.02 Operating Instructions Manual

11.2 Issue functions

11.2.1 Add-up mode < sum >
With this function the individual weighing values are added into the summation
memory by pressing a button and edited, when an optional printer is connected.
Activate function:

In Setup menu invoke the menu setting < Print sum > and confirm on
button ➔.

Use the navigation keys  to select the setting < on > and confirm on ➔
button.

To exit the menu press the navigation key  repeatedly
Condition: Menu setting
< prmode  trig  manual  on >
Add-up weighed goods:

If required, place empty container on scale and tare.

Place first good to be weighed on balance. Wait until stability display (
appears and then press the PRINT-button. The display changes to < sum1 >,
followed by the current weighing value. The weighing value is stored and edited
by the printer. The symbol  pops up. Remove the weighed good.

Place second good to be weighed on balance. Wait until stability display (
appears and then press the PRINT-button. The display changes to < sum2 >,
followed by the current weighing value. The weighing value is stored and edited
by the printer. Remove the weighed good.

Add-up more weighed goods as described above.

You can repeat this process until the capacity of the scales is exhausted.
Display and edit sum „Total":

Press the PRINT key long time. The number of weighings and the total weight are
edited. The sum memory is deleted; the symbol [..] extinguishes.
45
)
)
TCDS-BA-e-2210