Adjustments Ecom-Lsg; Switch Off; Function Control Ecom-Lsg - Ecom DP Operation Manual

Hide thumbs Also See for DP:

Table of Contents

21. Adjustments ecom-LSG

If the <I/O> key is pressed, first the sensitivity step can be selected with the

<HOLD> key (small bars = low sensitivity; middle bars = middle sensitivity; large

bars = high sensitivity). After repeated pressing of the <I/O> key, the battery capac-

ity is indicated. If only 4 bars (grey) are indicated, the capacity is still sufficient for

approx. 1 hour. With the help of the <HOLD> key the following adjustments can be

selected :

- without lighting/without acoustic signal

- with lighting/without acoustic signal

- without lighting/with acoustic signal

- with lighting/with acoustic signal

With the <I/O> key the selected adjustment is taken over and the adjustment menu

is left.

Keep the <I/O> key pressed until all bars in display are gone.

Unscrew the cover cap of the testing bottle and hold the

sensor head over the opened bottle (see illustration). If

the sensor is correct, the bar line display shows a clear

reaction. The sensor can be changed at switched off in-

strument (unscrew sensor head - replace sensor element

with a new sensor element - mount sensor head).

Table of Contents