Sensor Setup; View Service Information - Ecom DP Operation Manual

9. Sensor setup

The sensors in the instrument are given factory specified
designations that can be changed by the user. Using the
<UP/DOWN> cursor keys, scroll to "Sensor setup" menu.
Press <OK>. Open the edit function by pressing <OK>
two times.
A maximum of 6 characters (letters, numbers and special
characters) can be used in the sensor designation. Using
the <UP/DOWN> cursor keys, select the position to be
changed (sign blinks). Use the <UP/DOWN> cursor keys
to select the character that should stand on this position.
Starting from the current one and using the <UP> key,
the following characters are stored in the instrument in
the following succession:
Blank sign
A - Z
a - z
Ä -Ü
ä - ß
0 - 9
Special characters
Once the renaming procedure is complete, press <OK>
to store.

10. View service information

- Use the cursor keys <UP/DOWN> to scroll thru until the
menu point "Service".
- Press <OK> and an info window will be opened in which
the address and phone number of the competent service
centre as well as the instrument version (e.g. ECOM DP
V3.1) will be displayed.
16