Pressure Auto -> 0 By Start; Choose Printer (Ecom-P); Battery Loading; Display Damping - Ecom DP Operation Manual

8.2. Pressure Auto -> 0 by start
The ecom-DP normally zeroes the internal pressure sen-
sor during switch-on (adjustment „YES"). If the instru-
ment is to remain connected to a pressure source, so this
adjustment can be modified:
- Scroll with the cursor keys <UP/DOWN> until the menu
point "Pressure auto -> 0 by start".
- Press <OK> to activate.
- Use the cursor keys <RIGHT/LEFT> to modify the ad-
justment (YES or NO).
- Confirm the modification with <OK>.

8.3. Choose printer (ecom-P)

Please choose the used printer as follows:
- Scroll with the cursor keys <UP/DOWN> until the menu
point "ecom-P".
- Press <OK> to activate.
- Use the cursor keys <RIGHT/LEFT> to modify the ad-
justment (YES = printer ecom-P or NO = printer HP
82240B).
- Confirm the modification with <OK>.

8.4. Battery loading

The ecom-DP is able to work with batteries and AC power
(option):
- Scroll with the cursor keys <UP/DOWN> until the menu
point "Battery loading".
- Press <OK> to activate.
- Use the cursor keys <RIGHT/LEFT> to modify the ad-
justment (YES = using AC power for charging batteries
or NO = no AC power used).
- Confirm the modification with <OK>.

8.5. Display damping

The display damping can be adjusted to various meas-
urement duties. 7 damping steps can be selected (1 = no
damping; 7 = high damping).
13