Grizzly T33256 Owner's Manual page 20

4. Start machine and allow it to run while ensur-
ing belt tracks properly. Fine-tune tracking
with nut shown in Figure 17 as necessary
before proceeding to next step.
Belt
Tracking
Nut
Figure 17. Location of belt tracking nut.
Motor should run smoothly and without
unusual problems or noises.
— If motor does not run smoothly, turn
machine OFF and disconnect power.
Contact technical support.
5. Turn machine OFF.
-18-
6. Remove switch disabling key from ON/OFF
switch, as shown in Figure 18.
Figure 18. Removing switch key from paddle
switch.
7.
Try to start machine with paddle switch.
Machine should not start.
— If machine does not start, switch disabling
feature is working correctly.
— If machine does start, immediately stop
machine. Switch disabling feature is not
working correctly. This safety feature must
work properly before proceeding with reg-
ular operations. Call Tech Support for
help.
Model T33256 (Mfd. Since 04/22)