Grizzly T32459 Owner's Manual
  1. Manuals
  2. Brands
  3. Grizzly Manuals
  4. Sander
  5. T32459
  6. Owner's manual

Grizzly T32459 Owner's Manual

2" x 42" knife-making belt sander/grinder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL T32459
2" X 42" KNIFE-MAKING
BELT SANDER/GRINDER
OWNER'S MANUAL
(For models manufactured since 03/23)
COPYRIGHT © MARCH, 2023 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#CS22595 PRINTED IN CHINA
V1.03.23
***Keep for Future Reference***

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T32459 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Grizzly T32459

Summary of Contents for Grizzly T32459

  • Page 1 (For models manufactured since 03/23) COPYRIGHT © MARCH, 2023 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #CS22595 PRINTED IN CHINA V1.03.23...
  • Page 2 This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.

  • Page 3: Table Of Contents

    Table of Contents INTRODUCTION ..........................2 Contact Info ..........................2 Manual Accuracy ........................2 Identification ..........................3 Controls & Components ......................4 Machine Data Sheet ........................5 SECTION 1: SAFETY ........................7 Safety Instructions for Machinery ....................7 Additional Safety for Metal Belt Grinders ................... 9 SECTION 2: POWER SUPPLY ......................

  • Page 4: Introduction

    Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect. Failure to do so could result in serious personal injury, damage to equip- ment, or poor work results. Model T32459 (Mfd. Since 03/23)

  • Page 5: Identification

    N. Platen Tilt Lock Handle For Your Own Safety Read Instruction Manual Before Operating Sander a) Wear eye protection. b) Support workpiece with tool rest. c) Maintain ⁄ in. maximum clearance between tool rest and abrasive belt. Model T32459 (Mfd. Since 03/23)

  • Page 6: Controls & Components

    K. ON/OFF Switch: Turns machine ON and E. Tool Rest Lock Handle: Loosen to remove OFF. tool rest or adjust tool rest position relative to platen and tighten to secure. Variable-Speed Dial: Rotates to adjust motor and belt speed. Model T32459 (Mfd. Since 03/23)

  • Page 7: Machine Data Sheet

    Machine Data Sheet MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL T32459 2" X 42" KNIFE MAKING BELT MODEL T32459 SANDER/GRINDER 2" X 42" KNIFE-MAKING BELT SANDER/GRINDER Product Dimensions: Weight................................
  • Page 8 The information contained herein is deemed accurate as of 3/17/2023 and represents our most recent product specifications. Model T32459 PAGE 2 OF 2 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. Model T32459 (Mfd. Since 03/23)

  • Page 9: Section 1: Safety

    Never operate under the influence of drugs or injury or blindness from flying particles. Everyday alcohol, when tired, or when distracted. eyeglasses are NOT approved safety glasses. Model T32459 (Mfd. Since 03/23)
  • Page 10 Make sure they are properly installed, you experience difficulties performing the intend- undamaged, and working correctly BEFORE ed operation, stop using the machine! Contact our operating machine. Technical Support at (570) 546-9663. Model T32459 (Mfd. Since 03/23)

  • Page 11: Additional Safety For Metal Belt Grinders

    Always or death. Keep all guards in place and closed; DO grind with workpiece firmly against rest or another NOT wear loose clothing, gloves, or jewelry; and support device, if feasible. tie back long hair. Model T32459 (Mfd. Since 03/23)

  • Page 12: Section 2: Power Supply

    -10- Model T32459 (Mfd. Since 03/23)
  • Page 13 Two-prong outlets do not meet the grounding requirements for this machine. Do not modify or use an adapter on the plug provided—if it will not fit the outlet, have a qualified electrician install the proper outlet with a verified ground. -11- Model T32459 (Mfd. Since 03/23)

  • Page 14: Section 3: Setup

    IMPORTANT: Save all packaging materials until you are completely satisfied with the machine and have resolved any issues between Grizzly or the shipping agent. You MUST have the original pack- aging to file a freight claim. It is also extremely helpful if you need to return your machine later.

  • Page 15: Site Considerations

    Children and visitors may be seriously injured if unsuper- vised around this machine. Lock entrances to the shop or disable start switch or power connection to prevent Figure 8. Control box attached to mount. unsupervised use. -13- Model T32459 (Mfd. Since 03/23)
  • Page 16 Figure 10, then tighten frame tilt frame (see Figure 12). lock handle to secure. Abrasion Injury Label Figure 12. Platen assembly flipped and installed Figure 10. Frame tilted to vertical position. correctly. -14- Model T32459 (Mfd. Since 03/23)
  • Page 17 Figure 14. Belt Belt Tracking Knob Belt Gas Strut Wheel Rotation (1 of 4) Arrow Figure 16. Abrasive belt installed around wheels. Figure 14. Gas strut and belt tracking knob installed. -15- Model T32459 (Mfd. Since 03/23)

  • Page 18: Test Run

    Fingers and other body parts can be quickly injured if they touch moving abrasive surfaces. To reduce this risk, wear gloves while manually pushing belt. -16- Model T32459 (Mfd. Since 03/23)
  • Page 19 Gloves could be caught and fine-tune tracking with belt tracking knob in moving parts. as necessary while machine is running. Press EMERGENCY STOP button in (see Figure 19). -17- Model T32459 (Mfd. Since 03/23)
  • Page 20 Figure 23. Tool rest adjusted parallel to of EMERGENCY STOP button is NOT workbench and location of tool rest angle cap working properly and must be replaced screw. before further using machine. 15. DISCONNECT MACHINE FROM POWER! -18- Model T32459 (Mfd. Since 03/23)

  • Page 21: Section 4: Operations

    Regardless of the content in this sec- in this manual are easier to understand. tion, Grizzly Industrial will not be held liable for accidents caused by lack of training. Due to the generic nature of this overview, it is not intended to be an instructional guide.

  • Page 22: Workpiece Inspection

    Always support workpiece against tool rest when grinding if possible. Use extreme care to provide a safe distance between belt and any body part. -20- Model T32459 (Mfd. Since 03/23)

  • Page 23: Choosing Grinding Belts

    Ultimately, the type of metal you use and your The Model T32459 frame can be positioned from stage of finish will determine the best grit types to 0°–90°, depending on your operation. With the install on your grinder.

  • Page 24: Adjusting Platen Tilt

    26 to adjust tool rest tilt to match new frame Loosen tool rest lock handle (see Figure 29), position and to prepare tool rest for desired so you can move it as needed during next operation. step. -22- Model T32459 (Mfd. Since 03/23)

  • Page 25: Installing/Changing Belt

    If tool rest can be installed for operation, refer to Adjusting Tool Rest on Page 26 to adjust tool rest swivel and clearance to match platen position. If tool rest cannot be safely installed for operation, remove it. -23- Model T32459 (Mfd. Since 03/23)

  • Page 26: Pre-Tracking Belt

    Tip: Loosen tool rest lock handle to remove release belt tension handle to tension belt. tool rest assembly while tracking belt for unobstructed view of platen and wheels. Belt MUST be pre-tracked before connecting machine to power. Proceed to Pre-Tracking Belt. -24- Model T32459 (Mfd. Since 03/23)

  • Page 27: Checking/Adjusting Belt Tracking

    WARNING: DO NOT wear gloves while operating machine. Gloves could be caught in moving parts. Tool Rest Checking/Adjusting Belt Proceed Lock Handle Tracking. Figure 36. Location of tool rest and tool rest lock handle. -25- Model T32459 (Mfd. Since 03/23)

  • Page 28: Adjusting Tool Rest

    Tool Rest Lock Handle Figure 39. Location of tool rest lock handle and swivel cap screw. Refer to Adjusting Tool Rest Clearance on Page 27. Figure 37. Location of tool rest angle cap screw. -26- Model T32459 (Mfd. Since 03/23)
  • Page 29 (see Figure 43), then tighten handle to secure. Maximum ⁄ " Gap Tool Rest Figure 41. Location of swivel cap screw. Lock Handle Refer to Adjusting Tool Rest Clearance. Figure 43. Tool rest clearance adjustment controls. -27- Model T32459 (Mfd. Since 03/23)

  • Page 30: Flat Grinding

    Whichever one you use, make sure that you hold knife firmly and ease it into belt without Figure 44. Properly grinding workpiece face. excessive pressure to ensure safe operation. Figure 45. Properly grinding workpiece edge. -28- Model T32459 (Mfd. Since 03/23)

  • Page 31: Slack Belt Grinding

    To slack belt grind: Wheels on Page 34 to adjust platen correctly to resume flat grinding operations. DISCONNECT MACHINE FROM POWER! Remove (2) cap screws, lock washers, and flat washers shown in Figure 47 to remove platen. -29- Model T32459 (Mfd. Since 03/23)

  • Page 32: Section 5: Accessories

    T32402—EDGE Khor G2 Safety Glasses, Tint serious personal injury or machine damage. T32404—EDGE Mazeno Safety Glasses, Clear To reduce this risk, only install accessories recommended for this machine by Grizzly. NOTICE Refer to our website or latest catalog for T32323 T32401 additional recommended accessories.

  • Page 33: Section 6: Maintenance

    Cleaning Cleaning the Model T32459 is relatively easy. Vacuum excess shavings, and wipe off any remaining dust with a dry cloth. Never use com- pressed air to blow away dust as airborne par- ticles may be combustible.

  • Page 34: Section 7: Service

    3. Inspect drive wheel. Replace or tighten if necessary. 4. Motor fan rubbing on fan cover. 4. Fix/replace fan cover; replace loose/damaged fan. 5. Motor bearings at fault. 5. Test by rotating shaft; rotational grinding/loose shaft requires bearing replacement. -32- Model T32459 (Mfd. Since 03/23)
  • Page 35 1. Use tool rest to support workpiece (Page 26). Workpiece 1. Not supporting workpiece properly. frequently gets 2. Starting workpiece on a leading corner. 2. Start workpiece on a trailing corner. pulled out of your hand. -33- Model T32459 (Mfd. Since 03/23)

  • Page 36: Adjusting Platen To Wheels

    ⁄ " from straightedge, then tighten screws. Adjust wheel covers back to their original position and tighten acorn nuts to secure. Wheel Cover Figure 53. Wheel covers adjusted back and away from platen. -34- Model T32459 (Mfd. Since 03/23)

  • Page 37: Replacing Gas Strut

    Adjusting Frame Tilt on Page 21). Adjust hex nuts from Step 1 without turning ball studs until they contact machine frame to Turn gas strut ball studs counterclockwise to secure. remove old gas strut (see Figure 56). -35- Model T32459 (Mfd. Since 03/23)

  • Page 38: Section 8: Wiring

    Technical Support at (570) 546-9663. The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com. -36- Model T32459 (Mfd. Since 03/23)

  • Page 39: Wiring Diagram

    CONTROL BOX EMERGENCY STOP Button NO NC GK AF1652-11Z Potentiometer WTH118-2W Motor 4.7K Speed ON/OFF Switch KCD1 Neutral Ground 110 VAC 5-15 Plug Figure 58. Control box wiring. READ ELECTRICAL SAFETY -37- Model T32459 (Mfd. Since 03/23) ON PAGE 36!

  • Page 40: Section 9: Parts

    SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to check for availability. Main 17-2 17-3 17-1 BUY PARTS ONLINE AT GRIZZLY.COM! -38- Model T32459 (Mfd.
  • Page 41 PHLP HD SCR M4-.7 X 10 PT32459039 CAP SCREW M6-1 X 10 PT32459081 HEX NUT M10-1.5 THIN PT32459040 CARRIAGE BOLT M6-1 X 16 BUY PARTS ONLINE AT GRIZZLY.COM! -39- Model T32459 (Mfd. Since 03/23) Scan QR code to visit our Parts Store.

  • Page 42: Labels & Cosmetics

    Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable, the owner of this machine MUST replace it in the original location before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com. BUY PARTS ONLINE AT GRIZZLY.COM! -40- Model T32459 (Mfd.

  • Page 43: Warranty & Returns

    WARRANTY & RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.

Table of Contents