Basic Operation - Vantrue OnDash N2 Pro User Manual

4. Basic Operation
4.1 There are two ways to power ON/OFF the camera:
A. Manually
Single press the Power Button to power ON the
camera unit, long press the button to power it
OFF.
B. Automatically
When connected to the car charger, the
camera will auto-power ON after you start your
car and the battery charging will commence.
The camera will power OFF 5 seconds after you
turn off the car engine.
4.2 Menu Settings
After powering ON the camera, press the MENU
button to enter the setup process.(If the camera
is recording video, press the OK button to stop
recording before pressing the MENU button.)
Record Setup
- 10 -
System Setup