Vantrue OnDash N2 Pro User Manual page 27

4.13 Connecting External GPS Receiver (Optional
Accessory)
Install the External GPS Mount onto the camera
1.
instead of the original mount.
Plug the Type C USB Connector into the GPS
2.
Mount to power it.
3. Once charged, the camera will power on.
Recording will commence if a microSD card
has been inserted, just press the Confirm Button
to stop recording.
4. Press the MENU button to enter setup, go to
"GPS Setup">"GPS Setup" to activate the
camera's GPS function.
5. The GPS receiver will start to search for a GPS
signal, this is represented by a gray GPS icon
on the screen. Once the GPS signal has been
received and locked, the icon will turn orange.
1080P+1080P
3
0
6. You can include GPS tracking and vehicle
speed on the video footage, go to "Record
Setup">"Stamp">"GPS Location Stamp"and
"Speed Stamp" to set.
0:23
03:07:29
01/01/2021
1080P+1080P
3
0
- 23 -
0:23
03:07:29
01/01/2021