Vantrue OnDash N2 Pro User Manual page 17

Non-use Auto Power OFF: A default setting of 3
MIN means the camera is ON but not in use, it will
auto turn OFF after 3 minutes of inactivity. Press
OK to choose between 1, 2 minutes or 3 minutes,
or OFF to disable this feature.
Flicker Frequency: Press OK to toggle between
50Hz/60Hz.
System Info: Press OK to check the current
firmware version. (System Info)
Default Setting: Press OK and select OK to reset
the device back to stock factory settings.Press
the MENU button to exit and complete the setup.
C. GPS setup
NOTE: To use the GPS function requires the
purchase of an extra GPS mount for the camera.
GPS Setup: Default is ON. Press OK to toggle it
ON/OFF.
Speed Unit: Default is MPH. Press OK to select
either KM/H or MP/H.Press the MENU button to
exit and complete the setup.
D. Files
Review and delete images/videos stored in the
file folders.
Normal: Standard videos recorded.
Event: Critical event videos detected by G-Sen-
sor activity or manually locked by user.
Photo: Standard images.
All: All the standard videos, critical event videos
and standard imaged recorded.
- 13 -