Vantrue OnDash N2 Pro User Manual page 20

4.5 Auto LCD OFF
This feature avoids any chance of the screen
being a distraction in the vehicle, especially at
night when the illumination from the LED screen
can be a nuisance or even a hazard to the
driver. If you set the Auto LCD Off to 3 minutes,
the camera's LCD will light off after 3 minutes but
recording will continue with blue light blinks on
the emergency button. You can press any
button to light on the screen.
P
Please go to System Setup to adjust this time to 1,
3, 5, or OFF to disable it so the LCD can always
stay on.
4.6 Loop Recording
After inserting a memory card, the camera will
(by default) immediately start loop recording
video when connected to a power source and
powered ON. If the device is not connected to a
power source, it will not immediately start
recording after you press the Power ON button –
press the OK button to start recording.
OK
- 16 -