Vantrue OnDash N2 Pro User Manual page 21

While recording, the LED indicator will blink and
a red dot will flash on the top left of the screen.
You can stop/start the recording at any time by
pressing the OK button.
1080P+1080P 0:23
3
0
03:07:29 01/01/2021
By default, the Loop Recording Time is 3 minutes.
Please go to "Record Setup">"Loop Recording"
to change it to 1 minute or 5 minutes. When Loop
Recording is turned off, the camera will record
video in 20 minute clips, but will not overwrite old
videos when the storage card is full.
The loop recording video file name format is
"Year_Date_Time_SerialA". For example:
"2021_0101_060101_001A", the suffix A indicates
front cam recorded files, whilethe suffix B refers
torear cam recorded files). Standard files are
stored in the "Video/Normal" folder. When the
microSD card is full, the camera will write over
older files.
4.7 IR LED light
By default, the IR LED light is auto on. ShortPress
Power button to toggle the night vision mode ON,
Auto ON/OFF, OFF.
- 17 -