Vantrue OnDash N2 Pro User Manual page 10

3.2 Installing a Memory Card (Recommend VANTRUE
microSD Card).
Please use a genuine Micro SD memory card
from 32GB to 256GB with a speed rating of class
10 or Higher. We recommend use Vantrue Micro
SD Card (not include). Please insert the SD card
when dash cam is off. Carefully insert the
memory card into the camera's card slot until it
clicks. To remove the card, power off the
camera first, then push the card into the slot until
it clicks again.
Before using the card, please format it correctly
using these steps:
Press MENU to enter setup; if the camera is
•
recording video, press Confirm button to stop
the recording
Press the DOWN button to highlight the System
•
Setup option, press Confirm.
Press the DOWN button to highlight the Format
•
option, press Confirm followed by the DOWN
button to select YES.
NOTE: If it says 'please insert TF card' or 'sd card error'
here, please press the recording button(OK button) and
press M button to access into the menu, go 'system
setup' and choose 'format'. Then the card will work well
on the camera.
(If you format it on computer, please search online on
"How to format a 64GB microSD card to FAT32".）
- 6 -