Vantrue OnDash N2 Pro User Manual page 18

4.3 Set Date/Time
Open the MENU interface, navigate to"System
Setup">"Time & Date", and press the OK button
to set the date/time. Navigate UP or DOWN to
select date and time values. Press OK to confirm
and proceed. To finish setup, just press the MENU
button to exit.
NOTE: Date format is DD/MM/YY with the time in 24 hour
format.
0.33/59.11GB
Event
Normal
Photo
All
OK ENTER
03 / 05 / 2021
10 / 48 / 08
DD/MM/YY
OK
ENTER
- 14 -
Files
M
BACK
Time&Date
M
BACK