Table of Contents
Advertisement
ELECTRIC BICYCLE METER KT—LCD10H Product User Manual
○
Display of power-assist startup
The meter is driving with power-assist under normal operating conditions, the display
interface flashes the power-assist startup sign (ASSIST) as shown in the figure. The sign
will be off automatically after about five seconds.
○
PAS Ratio (or Handlebar) Gear Switch
Under normal operation, press
switch the power assist ratio (or handlebar) gear (ASSIST), changing motor output power.
Switching range is 0-5 gear (this can also be configured according to the customer
requirements), gear 1 is for the lowest power, and gear 5 is for the highest power.
At every startup, the meter will automatically restore gear (this can also be
configured as required by users) when it was at last shut down. When the power
assist ratio is gear 0 zero, there's no power assist function.
button (UP) or
- 12 -
button (DOWN) to
Advertisement
Table of Contents
