ELECTRIC BICYCLE METER KT—LCD10H Product User Manual
press
button (UP) or
C10 parameter definition table:
C10 value
When the meter is needed to restore default setting, C10 selects y, hold
for about 2 seconds, all parameters restore default settings and exit setting environment,
and then return to the display1.
C10 selects n, press
parameter setting interface.
○
C11 Meter Attribute Selection Setting
Enter C11 parameter setting interface, C11 parameter column flashes.
C11 is meter attribute selection setting, the setting range is 0-2, press
(UP) or
button (DOWN) for selection.
C11 parameter definition table:
C11
value
Meter uses LCD3 new version of communication protocol, it is compatible
0
Meter uses LCD1 and LCD2 old version communication protocol, it is not
1
button (DOWN) for selection.
n
y
button (SW) to save the current set values and enter C11
C11 parameter setting interface
LCD1 and LCD2.
compatible second display.
Restore default setting
Function off
Function on
Meter Attribute
- 32 -
button
button