C13 Abs Brakes Of The Controller And Parameters Of Anti-Charge Control Setting - KUNTENG KT-LCD10H User Manual

ELECTRIC BICYCLE METER KT—LCD10H Product User Manual
1
2
3
4
5
6
7
C12 default value is 4, namely, controller minimum operating voltage (voltage
shortage value); when setting is 5, the default value plus 0.5V, when setting is 4, the
default value minus 0.5Vand so on.
After finishing C12 parameter setting, press
values and enter C13 parameter setting interface.
○

C13 ABS brakes of the controller and parameters of anti-charge control Setting

Enter into C13 parameter setting interface, C13 parameter bar flashes.
C13 is ABS brakes of the controller and parameters of anti-charge control setting, the
default value is 0 with the setting range between 0-5, press
(DOWN) button to make selection.
Default value-1.5V
Default value-1V
Default value-0.5V
Default value 20V
Default value+0.5V
Default value+1V
Default value+1.5V
C13 parameter setting interface
- 34 -
Default
value-1.5V
Default value-1V
Default
value-0.5V
Default value
30V
Default
value+0.5V
Default value+1V
Default
value+1.5V
button (SW) to save the current set
Default
value-1.5V
Default value-1V
Default
value-0.5V
Default value
40V
Default
value+0.5V
Default value+1V
Default
value+1.5V
(UP) button or