C4 Throttle Function Setting - KUNTENG KT-LCD10H User Manual

0
1
2
3
4
5
6&7
8
After finishing C3 parameter setting, press
values and enter C4 parameter setting interface.
○
C4 Handlebar Function Setting
Enter C4 parameter setting interface,C4 parameter column flashes.
C4 is handlebar function setting, the setting range is 0-4, press
button (DOWN) for selection.
C4 parameter definition table：
C4 value
0 zero startup handlebar
Zero startup, handlebar speed limit is
1
6Km/h
Zero startup, handlebar speed limit is
2
specified
ELECTRIC BICYCLE METER KT—LCD10H Product User Manual
The meter is powered on and the power assist ratio is at gear 0.
The meter is powered on and the power assist ratio is at gear 1.
The meter is powered on and the power assist ratio is at gear 2.
The meter is powered on and the power assist ratio is at gear 3.
The meter is powered on and the power assist ratio is at gear 4.
The meter is powered on and the power assist ratio is at gear 5.
Each startup will automatically restore the gear shutdown last time.
C4 parameter setting interface
P4=0
Retain
button (SW) to save the current set
Non-zero startup handlebar
Before power assist, the handlebar speed limit is
6Km/h, after power assist, handlebar is full speed.
Non-zero startup, handlebar is specified speed
limit.
- 26 -
button (UP) or
P4=1