C10 Automatic Restore Default Setting - KUNTENG KT-LCD10H User Manual

ELECTRIC BICYCLE METER KT—LCD10H Product User Manual
C9 value
When C9 setting is 1, press
is startup, and then enter the password settings interface, three password setting columns
flash.
The password setting is done sequentially from left to right, press
confirm after each setting and enter next setting. Password setting range is 000-999, press
button (UP) or
Please note：If you forget your password, the parameters can only be copied (see
parameter copy) by data source meter prier to be decoded.
After finishing C9 parameter setting, press
values and enter C10 parameter setting interface.
○
C10 Automatically Restore Factory Setting
Enter C10 parameter setting interface, C10 parameter column flashes.
C10 is automatic restore factory settings, the default is n, and the setting can be n, or y,
0
1
button (SW), indicating that the password function
Password Setting Interface
button (DOWN) for selection.
C10 parameter setting interface
Startup password setting
Function off
Function on
button (SW) to save the current set
- 31 -
button to