KUNTENG KT-LCD7 User Manual

KT-LCD7 e-Bike Display User Manual
Dear customer, please read this manual before you use KT-LCD7 instrument. The manual will guide
you use the instrument correctly to achieve a variety of vehicle control and vehicle status displays.
Functions and Display
1
UP button
2
SW button
3
DOWN button
4 ASSIST
Pas level
5
Battery capacity indicator
6
Backlight and headlights
7 CRUISE
Cruise function
8 PAS
Power-assisted function
TM
Single trip time
9
TTM
Total trip time
10 THROTTLE
Throttle display
11
6KM/H push power assist
Operation
1. ON/OFF
Hold button long to turn on the power, and hold
off the power. When the motor stops driving and when the e-bike is not used for a consecutive 5
minutes, it will automatically shut down and turn off the motor power supply.
2. Display 1
Hold
KM/H
Riding speed(metric)
MPH
Riding speed
12
MXS
MAX speed
AVS
Average speed
KM
Distance(metric)
Mil
Distance (imperial)
13 DST
Trip distance
ODO
Total distance
VOL
Battery voltage
14
The brake display
15
Bluetooth display
button long for a second time to turn
button to start up and enter display 1.
2.1 Turn on backlight and headlights
V1.0
2.2 Assist ratio gear (ASSIST) switch
2.3 6KM/H assist promotion function
(imperial)
2.4 THROTTLE display
2.5 PAS display
2.6 Cruise function
2.7 Bluetooth connection display
Hold button long to turn on backlight and headlights (the controller
should have headlight drive output function); hold
turn off the backlight and headlights.
Hold or button shortly to switch 1-5 file gear. Gear 1 is for the
minimum power, gear 5 is for the highest power. Each startup will
automatically restore the gear shutdown last time (the user can set randomly).
Gear 0 is without booster function.
Hold button and flashes, the vehicle drives at the speed not
more than 6KM /H. Release button, the function is invalid.
Turn on throttle, THROTTLE display.
When Power-assisted riding, PAS display.
After the cruise function is turned on, the trip riding speed is greater
than 7 KM/ H, hold button long and enter cruise, the CRUISE lit. Brake
or hold any button to cancel.
When the mobile phone is connected with the Bluetooth module, the
Bluetooth connection signal is on, display.
button long again to