C6 Backlight Brightness Adjustment Setting - KUNTENG KT-LCD10H User Manual

ELECTRIC BICYCLE METER KT—LCD10H Product User Manual
C5 value
00
01
02
03
04
05
06
07
08
09
10
When C5 setting is 10, maximum current value is controller maximum operating
current value (ie, limit current value); when setting is 9, maximum current value divided by
1.10, when setting is 8, maximum current value divided by 1.15 and so on.
After finishing C5 parameter setting, press
values and enter C6 parameter setting interface.
○

C6 Backlight Brightness Adjustment Setting

Enter C6 parameter setting interface, C6 parameter column flashes.
C6 is the meter backlight brightness adjustment setting, the default value is 3, and
setting range is 1-5, press
C6 parameter definition table：
Maximum current value(A)
Three level slow start/ Maximum current value
Two level slow start/ Maximum current value
One level slow start/ Maximum current value
Maximum current value÷2.00
Maximum current value÷1.50
Maximum current value÷1.33
Maximum current value÷1.25
Maximum current value÷1.20
Maximum current value÷1.15
Maximum current value÷1.10
Maximum current value
C6 parameter setting interface
button (UP) or
- 28 -
button (SW) to save the current set
button (DOWN) for selection.