L3 Parameters Setting; L4 Parameters Setting - KUNTENG KT-LCD8HP User Manual

ELECTRIC BICYCLE METER KT—LCD8H Product User Manual
After finishing L2 parameter setting, press
setting interface
○
L3 parameter setting
Under parameter setting interface, move cursor to L3 and press
flashes
L3 parameter is applicable to the dual mode controller. The default value of the
factory is 1.
When L3=0, the controller will activate Non-Hall model only when the Hall
sensor in the motor fails
When L3=1, the dual mode controller will choose the proper model to use
according to the controller system optimization.
After finishing L3 parameter setting, press
setting interface
○
L4 parameter setting
Under parameter setting interface, move cursor to L4 and press
button (SW) to return to parameter
button shortly (SW), the value
button (SW) to return to parameter
button shortly (SW), the value
- 37 -