P4 Throttle Startup Setting; P5 Power Monitoring Setting - KUNTENG KT-LCD8HP User Manual

ELECTRIC BICYCLE METER KT—LCD8H Product User Manual
control mode is gear 5 of "imitation torque control" mode, when P3 parameter setting is
0, power assist control mode is gear 5 of "speed control" mode. P3 parameter needs to be
determined according to the distributed function of the controller, its setting range is 0 or 1,
press button (UP) or
After finishing P3 parameter setting, press
parameter setting interface
○

P4 Throttle Startup Setting

Under parameter setting interface, move cursor to P4 and press
flashes.
P4 is throttle startup setting, when P4 setting is 1, indicating the throttle is under
"non-zero startup" mode, namely, the throttle can be effective only after startup the foot
power assist. When P4 setting is 0, indicating the throttle is under "zero startup" mode,
the motor can be startup by the throttle directly. P4 setting range is 0 or 1, press
button (UP) or
After finishing P4 parameter setting, press
setting interface
○

P5 Power Monitoring Setting

Under parameter setting interface, move cursor to P5 and press
flashes.
button (DOWN) for selection.
P4 parameter setting interface
button (DOWN) for selection.
button (SW) to return to the
button shortly (SW), the value
button (SW) to return to parameter
button shortly (SW), the value
- 20 -