C Parameter Setting; C1 Power-Assist Sensor And Parameter Selection Setting - KUNTENG KT-LCD8HP User Manual

ELECTRIC BICYCLE METER KT—LCD8H Product User Manual
P5 is power monitoring setting, when P5 setting is 0, the power monitoring is the
"real-time voltage" mode. Namely, it is the method to determine the battery capacity
based on real-time battery voltage. When P5 equals to a specified value, the power
monitoring is the "smart power" mode (this value is determined by the battery
characteristics, 4-11 for ordinary 24V lithium, 5-15 for 36V lithium). the range is from
0-64, press button (UP) or
After finishing P5 parameter setting, press
setting interface

C Parameter Setting

○
C1 Power-Assist Sensor and Parameter Select Setting
Under parameter setting interface, move cursor to C1 and press
flashes.
C1 is power-assist sensor and parameter select setting, its definition is shown in
P5 parameter setting interface
button (DOWN) for selection.
C1 parameter setting interface
- 21 -
button (SW) to return parameter
button shortly (SW), the value