Table of Contents
Advertisement
ELECTRIC BICYCLE METER KT—LCD8H Product User Manual
Unter parameter setting interface, holding
quit and the value will be save
If no operation within 1 minute, the meter will return to main interface and the last
value will be saved
General Project Setting
○
Maximum Trip Speed
Max speed setting LIM, hold
the value flash. To setting max speed by press
(DOWN). The default value of max speed was set according to user's requirement.
The motor will stop, when the speed exceeds the max speed which has been set before
After finishing the maximum riding speed setting, press
to return to parameter setting interface
○
Wheel Diameter
Under parameter setting interface, move cursor to DIM and press
shortly (SW), the value flashes. Press
choose the corresponding wheel diameter specification to a selected vehicle. The selection
range
of
wheel
5,6,8,10,12,14,16,18,20,23,24,26,27.5,700c, 28 and 29 inches.
button shortly (SW) when the cursor before LIM,
diameter
specifications
- 16 -
键（SW）
long for about 2seconds to
button (UP) or
button (UP) or
are
15
button
button shortly (SW) ,
button
button (DOWN) to
species
such
as
Advertisement
Table of Contents
