Table of Contents
Advertisement
ELECTRIC BICYCLE METER KT—LCD8H Product User Manual
Please note:
Besides, LCD8H P meter can only copy parameter of the same meter model.
User Setting Note
After entering the user setting environment, if there's no button operation on the data
for more than 1 minute, the meter will automatically return to display1, and the new set
parameters won't be saved.
The factory parameter set value and the default value of the meter can be set
according to user requirements, the meter parameter can be restored by using "C10
automatically restore factory setting " approach when adjusting it.
The parameter of all torque controller and the controller with special function should
be according to the result of the actual testing.
Version Information
KT_LCD8H P_V3.0
Released on October 27, 2022
Interface of finishing parameter copy
Both C9 power-on password and C11 meter attributes can't be copied.
- 40 -
Advertisement
Table of Contents
