L2 Parameters Setting; L3 Parameters Setting - KUNTENG KT-LCD11 User Manual

ELECTRIC BICYCLE METER KT—LCD11 Product User Manual
forced to be 20V.
When L1 = 2, the under-voltage value of the automatic under-voltage controller is
forced to be 30V.
When L1 = 3, the under-voltage value of the automatic under-voltage controller is
forced to be 40V.
After finishing L1 parameter setting, press
value and then enter L2 parameter setting interface.
○
L2 Parameter setting
L2 parameter is suitable for the super high-speed motor controller. The default of
the factory is 0.
L2 parameter will be activated when the value of P1 parameter exceeds 255. L2
parameter should use in combination with P1.
When L2=0, P1 parameter is set as the calculated value.
When L2=1, P1 parameter is set as a half of the calculated value.
After finishing L2 parameter setting, press
value and then enter L3 parameter setting interface.
○
L3 Parameter setting
button (SW) to save the current
button (SW) to save the current
- 33 -