ELECTRIC BICYCLE METER KT—LCD8H Product User Manual
setting method is the same to that of P2.
○
P4 Throttle Startup Setting
Enter P4 parameter setting interface after P3 parameter setting is finished, P4
parameter column flashes.
P4 is throttle startup setting, when P4 setting is 1, indicating the throttle is under
"non-zero startup" mode, namely, the throttle can be effective only after startup the foot
power assist. When P4 setting is 0, indicating the throttle is under "zero startup" mode,
the motor can be startup by the throttle directly. P4 setting range is 0 or 1, hold
button (UP) or
the same to that of P2.
○
P5 Power Monitoring Setting
Enter P5 parameter setting interface after P4 parameter setting is finished, P5
parameter column flashes.
P4 parameter setting interface
button (DOWN) shortly for selection. P4 parameter setting method is
- 20 -