P4 Throttle Startup Setting; P5 Power Monitoring Setting - KUNTENG KT-LCD8Y User Manual

ELECTRIC BICYCLE METER KT—LCD8H Product User Manual
press button (UP) or
After finishing P3 parameter setting, press
then press button (DOWN) to enter P4 parameter setting interface.
○

P4 Throttle Startup Setting

Enter P4 parameter setting interface,
P4 is throttle startup setting, when P4 setting is 1, indicating the throttle is under
"non-zero startup" mode, namely, the throttle can be effective only after startup the foot
power assist. When P4 setting is 0, indicating the throttle is under "zero startup" mode,
the motor can be startup by the throttle directly. P4 setting range is 0 or 1, press
button (UP) or
After finishing P4 parameter setting, press
then press button (DOWN) to enter P5 parameter setting interface.
○

P5 Power Monitoring Setting

Enter P5 parameter setting interface,
button (DOWN) for selection.
P4 parameter setting interface
button (DOWN) for selection.
i
button (SW) to save the current set values,
i
P4 parameter column flashes.
press button,
i
button (SW) to save the current set values,
i
P5 parameter column flashes.
press button,
- 20 -