Table of Contents
Advertisement
Setting up your N600i
This section explains how to prepare your phone for
use. Before you use your phone you must do the
following:
• Insert a valid USIM (Universal Subscriber Identity
Module) card
TM
• Insert the TransFlash
• Charge the battery
• Set the date and time
USIM card and TransFlash memory card are shipped
with N600i. Use those card for the initial setup.
USIM Card and TransFlash memory
card
Your N600i includes the USIM card that must be
inserted into your phone, and TransFlash memory
card that is used as an external storage media.
TransFlash package includes an adapter with which you
can transfer the data in TransFlash to PC.
The USIM card and TransFlash memory card
holders are located underneath the battery. If the
USIM card is removed, then the phone becomes
unusable until a valid USIM is inserted.
Always
disconnect
accessories from your phone before inserting and
removing your USIM card.
memory card
the
charger
and
other
To Insert/Remove the USIM Card and
TransFlash memory card
Ensure that the power is off. If the power is on, press
and hold
until power is off.
Insert/remove the USIM card as shown in the
diagram. Look at carefully and follow this instruction.
☛
Remove the battery cover.
About 3mm
☛
If the battery is inserted, remove this.
4
10
Rear cover
2
1
Battery
3
Advertisement
Table of Contents
